DMF-Z-20 New type BFEC Pulse Jet Valve DN20 AC220V DC24V Green Coil
1. Specially designed for reverse jet-type dust collector systems
2. High flow Cv(s) to 140 for effective bag cleaning
3. High cycle life
4. Fast opening/closing
5. Port size: DN20
6. Voltage:DC24V AC220V
|Diaphragm||NBR: -20~120 ℃|
|Viton: -30~180 ℃|
|Nitrile: -40~120 ℃|
|Pressure range||From 0.5 to 7.5 bar|
|Pilot Base||Brass (Chromed)|
|Bolts and screws||Stainless Steel|
|Diaphragm Backing disk||Stainless Steel|
|Diaphragm spring||Stainless Steel|
Recommended on time range: 50-500ms
Recommended time between pulses: 1 minute or greater
Pulse jet valve installation
1. Prepare supply and blowtube pipes to suit valve specification.
Avoid installing valves underneath the tank.
2. Ensure tank and pipes are free from dirt, rust or other
3. Ensure supply air is clean and dry.
4, Mount valves to inlet pipes and blowtube to valves, ensuring no
excess thread sealant can enter the valve itself.
5. Make electrical connections to solenoid.
6. Apply moderate pressure to system and check for installation
7. Fully pressurise system.
8. Test fire and listen for proper actuation and crisp pulse noise.
1. If the products we have in store, we will send it out ASAP after
2. If the products which were customized, we will complete the
production within a specified period of time, and send it out the
first time, we can promise it.
3. Also we can send by your delivery acount if you want.
4. We have a variety of ways to send goods, usually DHL, Fedex, TNL
will be normal ways. If you require use of a courier, we can do it.
|Our product features||Our Services Guarantee:|
|1) Competitive price||1) Prompt respond (Reply with 24 hours)|
|2) Good quality||2) Free Samples (Customer pay for the delivery cost)|
|3) Professional Packaging||3) Registration support.|
|4) Produce according to Customers’ instruction||4) Photos/videos are available during production.|
|5) None delay shipment||5) Loading inspection, and send loading photos before shipment.|
We can provide a series of after-sale service, such as product
introduction, mounting, debugging, technical support and so on.
All item Comes with Basic 3 Month Sellers Warranty, if item
defective in 3 Month, We will offer replacement without extra
Charger(including shipping fee) After we Receive the Defective
If item Defective after 3 Month, Buyers can still send it back, We
will contact suppliers or Manufactory for Warranty. Buyers Might
Need to pay the Shipping fee For resend the replaced item.